Waste Management Steps For Manufacturers

Waste Management Steps for Manufacturers Essay

Introduction

Factories are governed by the work of care to make sure that they undertake waste management practices through the production process. To ensure that an organization to make sure that the wastes produced are managed correctly, Cooks (2012) has recommended five major steps that needs to be taken by factories. These steps include: (1) monitoring; (2) collection; (3) transportation, (4) processing; and (5) disposal / recycle. The initial step in accordance with Cooks (2012) means that waste management needs have already been identified, measures to reduce waste outputs and recycling are noted, and that waste minimization progress has been reviewed. In the next step, measures are taken up to ensure that the procedure of waste collection from bin containers has been organized well. For instance, it is very important ensure the right collection bin sizes are given at the required frequency (Cooks, 2012). Moreover, additionally it is important to make sure that all of the bins have labels and stickers to be able to differentiate the waste material being discarded. This can help to help keep biodegradable wastes from the non-biodegradable wastes. Under this task, it is very important make certain that the bins could be easily accessed by the truck drivers.

Analysis

In the 3rd step (transportation), Cooks (2012) argues that waste material and waste vehicles ought to be organized so as to make sure that the waste collected is transported from the factory to the waste processing plant and landfills (Cooks, 2012). Additionally it is important to make sure that various kinds of wastes are transported using designated vehicles. For instance, corrosive factory wastes ought to be transported in vehicles built with thicker and compacted walls to avoid corrosion (Cooks, 2012). Before transporting the waste, it is very important ensure that the business, drivers, and vehicles have already been licensed by the neighborhood municipal council. Also, the EPA and safety standards for hazardous factory waste material must be upheld in order to avoid human and environmental effects (CYEN 2010).

Cooks 2012) also proposes that during processing, the wastes collected from the factory should undergo a separation process for purposes of identifying recyclable and non-recycled wastes. As the non-recyclable wastes need to be sent to landfills, the recyclable wastes have to be treated and packaged for reuse or recycling (CYEN 2010). The recyclable wastes are classified as recycleables and really should thus be delivered to recycling plants. However, liquid and hazardous wastes from the factories ought to be delivered to the procedure plants to create them less hazardous to both environment and humans (Cooks, 2012).

The final step proposed by Cooks (2012) may be the recycling or disposal of the collected and processed factory wastes. Cooks argues that step has to stick to the EPA regulations governing industrial wastes. For instance, it’s the responsibility of the relevant environmental management authorities to make sure that certain non-recyclable wastes have already been buried in suitable depths in order to avoid contaminating the water systems (CYEN 2010). Recyclable spend can be purchased to other recycling plants from the production of services. The cycle for waste management is completed at this time.

In waste management, it is very important consider what wastes have to be prioritized. That is normally done by the identification and classification of hazardous wastes based on the EPA’s recommendations. The simple explores the steps used to find out which wastes tend to be more important than others during waste reduction.

The initial step taken up to identify hazardous waste would be to determine the group of the wastes with regards to their effects on humans and the surroundings, its recyclability, and reuse (EPA, 2005). Under this stage, the volatility and toxicity degrees of the wastes are identified. The next thing is to look for the wastes which have been excluded as hazardous to humans and the surroundings. Next, wastes which have been classified by the EPA to be hazardous are determined, together with the effects they pose to both humans and the surroundings. In the 3rd step, one has to look for the characteristics of hazardous waste (White & Heckenberg, 2011). After determining the amount of toxicity with regards to chemical components, effects to humans and the surroundings, and the expense of waste management, we then determine if the waste is regulated under the Environmental Protection Regulation 2008 (White & Heckenberg, 2011). A chemical assessment test is also conducted to measure waste properties before classifying them. Moreover, measurable properties of hazardous wastes are also determined to facilitate classification.

Conclusion

The CDPHE (2008) proposes that the next step involves current available waste management standards evaluation before going aboard to the process of hazardous waste classification (CDPHE 2008). Once the current waste management standards have been evaluated, one should then determine the effects of the waste on the environment and people before. This is an important step in order to decide on whether to reduce waste or not. Thereafter, we need to prioritize the wastes that are to be reduced by the government based on the listed process and procedures.

Reference List

CDPHE (Colorado Department of Public Health and Environment) 2008, Hazardous Waste Identification Guidance Document. Web.

Cooks, J 2014, 5 Steps to effective waste management 2012. Web.

CYEN 2010, Solid waste management . Web.

EPA, 2005, Introduction to United States Environmental Protection Agency Hazardous Waste Identification (40 CFR Parts 261) . Web.

White, R & Heckenberg, D 2005, What is hazardous waste and what makes IT hazardous? Web.

Leave a Reply

Your email address will not be published.